Hunting for a way to jazz up your wall art? Try generating your have Do it yourself acrylic frames for customized 3D artwork. This write-up will stroll you via particularly how I produced these in my property.
If you are hunting for a custom made way to frame your images or artwork to make it stand out from the wall, these Do-it-yourself acrylic frames are the fantastic thing.
I landed on these frames because I desired a minor one thing to insert a minimal more pizzazz to my lavatory wall. 
We resolved to include my partner&rsquos like of golfing into the blend by printing photos he took of PGA golfing classes he&rsquos played in black and white.
I appreciate when art is a discussion piece, so this was the best addition to the rest room wall.
To make it truly stand out, I designed these Do it yourself acrylic frames for just about every of the photographs.
Below are the measures I took&hellip 
Table OF CONTENTS
- 1. Collect your products.
- two. Tape each facet of each individual corner.
- three. Mark the place you want to drill your holes.
- four. Drill your holes.
- five. Use your glue dots to safe your photographs to the frame.
- six. Mark the full on the wall where you prepare to dangle it.
- seven. Use your punch software to mark the total on the wall.
- 8. Drill your holes in the wall.
- nine. Screw the standoffs into the wall.
- 10. Connect your frame to the standoffs.
- eleven. get redirected here in the completed merchandise!
Disclaimer: This put up does involve affiliate backlinks for your convenience. This is at NO further value to you but earns me a compact fee. To browse additional, look at out our disclosure policy.
one. Get YOUR Products.
Very first items 1st, assemble all your products. All sources for every thing I made use of are linked down below. I also involved a record with backlinks of what we utilised to hang the frames, much too. 
FOR Creating THE Diy ACRYLIC FRAMES:
- Plexiglass/Acrylic Sheets
- Standoffs
- Glue Dots
- Piece of Lined Paper
- Drill 
- Drill Bits (one particular for the dimensions of the opening of your standoffs and a single for the screw for the wall)
- Painter&rsquos Tape
- Ruler
- Marking Resource (I employed a Sharpie)
FOR HANGING THE Do it yourself ACRYLIC FRAMES:
- Pencil
- Handheld Degree
- Punch
- Screwdriver
two. TAPE Every Side OF Every CORNER.
Plexiglass/acrylic is pretty delicate.
For the reason that of this, you have to be pretty thorough when you are drilling the holes.
Inserting a piece of painter&rsquos tape on possibly aspect the place you plan to drill your hole will support continue to keep the acrylic sheet from breaking or cracking when you drill.
I also stored the protecting include on each individual aspect of the piece, way too.
3. MARK Wherever YOU WANT TO DRILL YOUR HOLES.
The moment you have put the painter&rsquos tape on all 4 sides (or nonetheless a lot of places you program to drill a gap), you can spot a mark of the place you want to drill your gap.
I drilled my holes one&Prime in from each individual edge as you can see from the picture higher than.
4. DRILL YOUR HOLES.
Right before actually drilling, double and triple examine that your marks are level both of those horizontally and vertically.
You&rsquoll want to have these stage for when you dangle them. 
The drill bit you pick out must be big more than enough to allow for the standoff to fit inside of the hole.
I would do a take a look at operate on a piece of scrap material to make certain it is significant sufficient. 
The moment you are certain that the marking are degree and the little bit is significant adequate, you want to begin drilling.
In this article is a very good video to stick to if you would like a demonstration on how to drill as a result of acrylic.
You want to use about 50 % electricity when you are drilling.
Gradual and steady. If you go to quick, the acrylic will crack, so just take your time.
As you drill you must see spirals of the acrylic slowly but surely getting taken off. 
Repeat the drilling for every single gap you want.
5. USE YOUR GLUE DOTS TO Secure YOUR Photographs TO THE Frame.
The moment your holes are made, you can incorporate your photograph to the piece of acrylic/frame.
The crucial listed here is to once more, make confident your photo is amount before you fully protected it to the frame.
The glue dots are very sticky and don&rsquot permit for a great deal of wiggle home, so it may well be a great plan to line up a piece of lined paper guiding the body to aid you line the edges of your picture.
Whatsoever trick is effective for you to make certain the image gets glued to the body amount will do. 
six. MARK THE Complete ON THE WALL The place YOU Strategy TO Dangle IT.
As you commence to hold, mark your holes on the wall, but make absolutely sure your body is degree.
If you measured correctly in the phase ahead of drilling, the holes on your body should previously be stage.
If you are hanging a lot more than one particular body like I did, make guaranteed every frame is level in your grid, far too. 
seven. USE YOUR PUNCH Tool TO MARK THE Entire ON THE WALL.
I enjoy this instrument so significantly for the reason that it will get your gap began and will allow your drill to stay in location when you start drilling.
If you don&rsquot have a single, I hugely suggest it!
eight. DRILL YOUR HOLES IN THE WALL.
Be confident to use a bit that fits the screws that arrived along with your standoffs.
This will most possible be a lesser little bit than the one you applied on the frames.
I also used a stud finder to see if I essential drywall anchors, but mainly because these frames are not that heavy, you could in all probability do without the need of them.
9. SCREW THE STANDOFFS INTO THE WALL.
At the time you obtain your standoffs, you&rsquoll see how they function.
In buy for the image to &ldquostand off&rdquo the wall, you have to protected the standoff with the provided screw in advance of attaching the photo to the standoffs.
As you can see from the photo, producing confident all the things is amount and measured the right way is tremendous essential. 
ten. Connect YOUR Frame TO THE STANDOFFS.
After you&rsquove connected the standoffs, it&rsquos time to connect the pics!
Line up the standoffs with your drilled holes and secure the standoffs.
If all goes properly, every little thing will line up appropriately and be completely ready to go!
If you are like my dad and I, you&rsquoll appear across at least a person that doesn&rsquot line up correctly.
For this, we cheated a little little bit and secured the standoff to the body and utilised a glue dot to protected it to the wall, so it didn&rsquot transfer.
We only had to do this for two corners of two frames, but don&rsquot stress if you mess up a person&hellip We&rsquove been there! 
eleven. REVEL IN THE Concluded Products!
Now it&rsquos time to delight in your perform!
We did a grid of 9 complete photos which was a large endeavor with all the measuring, but I&rsquom in enjoy with how it turned out.
Permit me know in the reviews what you think of the completed product!